facebook twitter

MB-45 system - it is so called cold system used for exterior and interior elements, which require lower thermal insulation.

Products manufactured in this system are made of one-chamber section. Their main advantage is durability, variety of application and relatively low price. This system is also successfully used together with MB-60 system and therefore architecture elements, which have changeable thermal insulation, can be constructed. This system offers perfect solutions for partition walls, shop windows, windbreaks and spatial panel walls. Similar to MB-60 this system can also be bend, which makes it possible to construct various bow panel walls.

mb45
  1. Window-panel seal which ensures tight joint of the window panel packaging and the wing, at the same time it prevents from moisture penetration to the inner side of the window construction.
  2. Two-chambered frame and wing profile.
  3. Window panel packaging up to 50 mm with a space between the window panels which amounts for 6mm and reaches up to 26 mm.
  4. Inner seal protects from water infiltration to the inner part of the window construction.


Depth of the window construction amounts for 45 mm. The depth of the window's section amounts for 45 mm (frame) and 54 mm(wing). Such depths of the frame and wing make it look from the outside as one surface after it is closed. The shape of the profiles enables us to achieve slender and durable windows.

Designing:
  • possibility of applying to every type of window panel; the thickness of accessible window panel packages reaches up to 26 mm
  • big range of colors; products are painted with RAL varnish
  • possibility of bending the aluminum profiles into arcs
Tightness:
  • seals made of synthetic rubber EPDM
  • an effective system of water drainage and ventilation
mb45colour


In our standard offer each window is equipped in one-chamber composite glass- glazing package, which is manufactured of GUARDIAN glass.
Mwindows standard glazing package consists of 4 mm float glass, 16 mm spacer and 4 mm termofloat glass whereas the space between glasses is filled with gas- argon, which helps to achieve appropriate thermal insulation value.

Standard glazing packageincreased heat infiltration properties and its thermal insulation value amounts for U=1,0 according to norm EN-674.

Moreover,MWindows creates the possibility to choose an appropriate glazing package fully individually, in such a way that it poses even much better protection against burglary, noise as well as excessive insulation.




All kinds of MWindows doors and windows, which are manufactured on the basis of aluminium profiles are, in our standard offer, equipped in envelope ferrules ROTO-type Alu 500 and locks METALPLAST CZESTOCHOWA.
According to different types of hardware there are following types of windows:
  • Windows with T (tilt) function - the main function of this type of window is tilt-function, which is our standard offer.
  • Windows with C (casement) function - the main function of this type of window is casement-function.
  • Windows with C (casement) function - the main function of this type of window is casement-function.



mb45photos

Door system MB-60 is so called warm system.

Three chamber section consists of three chambers combined by a separator, which shows perfect thermal properties. Therefore it is possible to apply two-colour profiles- different outer and inner. The system of seals made of synthetic rubber EPDM increases window thermal insulation and reduces condensation of water vapour. Windows manufactured in this system can have almost all shapes: from standard rectangular to bows, circles and trapezium. They are adapted to any climatic conditions and all kinds of constructions, especially in house building, where thermal and acoustic insulation values are often factors which influence the choice of the windows


mb60
  1. Possibility of implementing wide range of window pane packages, which reach up to 50 mm.
  2. Three chamber construction of profiles, frame and wing guarantees an optimal acoustic and thermal insulation.
  3. Window seal guarantees tightness, which protects from the moisture infiltration to the inner part of the window.
  4. Thermal separators made of plastics guarantee proper thermal insulation.
  5. Inner seals prevents from water drainage to the inner part of the window construction.


 
Construction depth of the section amounts for 60 mm (frame), 69 mm wing.Such depths of the frame and wing make it look from the outside as one surface after it is closed. The shape of the profiles makes it possible to achieve slender and durable door constructions. System MB-60 shows low thermal insulation value U mainly thanks to the application of specially designed thermal separators and seals. When it comes to form, aesthetics, durability and function the windows are consistent with the requirements of buildings' thermal protection, ecological and healthy standards. Their usage guarantees savings of heat and protects from cold and noise.

Designing:
  • Wide range of colours, which are anodized and lacquered according to RAL colours
  • possibility of bending the aluminum profiles into arcs,
  • possibility of applying to every type of window panel; the thickness of accessible window panel packages range from 14 up to 50mm
Tightness and insulation:
  • three-chamber profiles construction with an inner insulation chamber,
  • inner seal on the whole perimeter of opened windows
  • glass is chosen according to standards, which meet thermal insulation requirements
  • seals of the highest quality are made of synthetic rubber
mb45colour


In our standard offer each window is equipped in one-chamber composite glass- glazing package, which is manufactured of GUARDIAN glass.
MWindows standard glazing package consists of 4 mm float glass, 16 mm spacer and 4 mm termofloat glass whereas the space between glasses is filled with gas- argon, which helps to achieve appropriate thermal insulation value.

Standard glazing packageincreased heat infiltration properties and its thermal insulation value amounts for U=1,0 according to norm EN-674.

Moreover, Mwindows creates the possibility to choose an appropriate glazing package fully individually, in such a way that it poses even much better protection against burglary, noise as well as excessive isulation.



All kinds of Mwindows, doors and windows, which are manufactured on the basis of aluminium profiles are, in our standard offer, equipped in envelope ferrules ROTO-type Alu 500 and locks METALPLAST CZESTOCHOWA.
According to different types of hardware there are following types of windows:
  • Windows with T (tilt) function - the main function of this type of window is tilt-function, which is our standard offer.
  • Windows with C (casement) function - the main function of this type of window is casement-function.
  • Windows with C (casement) function - the main function of this type of window is casement-function.



mb45photos

Increasing demand for the construction materials with high thermal insulation properties inspired Drutex to extend its offer for two new aluminium systems MB-70 and MB 70-HI.

MB-70 is a modern aluminium system intended for realizations of exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures. The system profiles have a three-chamber structure. The structural depth of the window sections is equal to 70 mm (frames) and 79 mm (casement), and for doors: 70 mm and 70 mm respectively. Such assumed depths of casement and frame sections give the effect of one surface from the exterior side after closing - in the case of the window, and the facing effect to the surface of casement and frames - in the case of doors.

Shape of the profiles allows achieving slender and resistant window and door structures.

The MB-70 system is characterized by a very low value of the overall heat-transfer coefficient Uf, thanks to application of the thermal breaks and gaskets. This is of a great significance in the times of increasing demands for the energy management and the environment protection. The value of heat transfer coefficient for constructions of the MB-70 system - depending on the applied profiles and accessories ranges between 1.5 and 2.39 W/m2K. In this system, the profiled "omega"-shaped thermal breaks are applied, of a width equal to 34 mm (windows) and 24 mm (doors), made from polyamide reinforced with fibreglass. The offered shape of thermal breaks increases the profile rigidity as compared to flat breaks and facilitates the section drainage, ensuring the appropriate thermal insulation in all atmospheric conditions at the same time. The thermal breaks applied in the windows have additional gaskets at the joining point with the sections, as well as tongues dividing the chamber between the internal and external aluminium sections into three parts.

The tightness is ensured thanks to using the special gaskets made of two-component EPDM synthetic rubber: solid and cellular, which guarantees its ageing resistance during the long-lasting exploitation, as well as very good thermal insulation. MB-70 is the first system in which this type of material was used for creating the central gasket. The system allows application of sets of glass panel of the thickness equal from 21 mm to 57 mm in window casements, and from 12 mm to 48 mm in fixed windows and door leafs. Such a wide thickness range of infill guarantees the possibility to apply all typical and untypical glass panels. A wide choice of colours in the standard palette makes it possible to meet the needs of our most demanding customers.
 
mb45colour
 
In our standard offer each window is equipped in one-chamber composite glass- glazing package, which is manufactured of GUARDIAN glass.
MWindows standard glazing package consists of 4 mm float glass, 16 mm spacer and 4 mm termofloat glass whereas the space between glasses is filled with gas- argon, which helps to achieve appropriate thermal insulation value.

Standard glazing packageincreased heat infiltration properties and its thermal insulation value amounts for U=1,0 according to norm EN-674.

Moreover, Mwindows creates the possibility to choose an appropriate glazing package fully individually, in such a way that it poses even much better protection against burglary, noise as well as excessive isulation.

All kinds of Mwindows, doors and windows, which are manufactured on the basis of aluminium profiles are, in our standard offer, equipped in envelope ferrules ROTO-type Alu 500 and locks METALPLAST CZESTOCHOWA.
According to different types of hardware there are following types of windows:
  • Windows with T (tilt) function - the main function of this type of window is tilt-function, which is our standard offer.
  • Windows with C (casement) function - the main function of this type of window is casement-function.
  • Windows with C (casement) function - the main function of this type of window is casement-function.


 

mb45photos
The construction of the door and window systems with a thermal barrier MB-70HI is based on well-proven, well developed and highly appreciated base systems MB-70.The thermal insulation performance of frames of this system is considerably higher than the insulation performance of base systems. The value of heat transfer coefficient Uf for constructions of the MB-70HI system - depending on the applied profiles and accessories ranges between 1.11 and 2.3 W/m2K.

Enhanced thermal insulation performance is achieved due to placing special insulating inserts in the central insulating chamber, formed by connecting aluminium profiles with thermal breaks. Thus formed inserts reduce heat transfer through this chamber due to low value of heat transfer coefficient.


The central location of inserts additionally limits convection and thermal radiation. The MB-70HI doors and windows, just like in the case of the base system, find application both in individual assemblies and in aluminium facades. mb45colour



In our standard offer each window is equipped in one-chamber composite glass- glazing package, which is manufactured of GUARDIAN glass.
MWindows standard glazing package consists of 4 mm float glass, 16 mm spacer and 4 mm termofloat glass whereas the space between glasses is filled with gas- argon, which helps to achieve appropriate thermal insulation value.

Standard glazing packageincreased heat infiltration properties and its thermal insulation value amounts for U=1,0 according to norm EN-674.

Moreover, Mwindows creates the possibility to choose an appropriate glazing package fully individually, in such a way that it poses even much better protection against burglary, noise as well as excessive isulation.


 


All kinds of Mwindows, doors and windows, which are manufactured on the basis of aluminium profiles are, in our standard offer, equipped in envelope ferrules ROTO-type Alu 500 and locks METALPLAST CZESTOCHOWA.
According to different types of hardware there are following types of windows:
  • Windows with T (tilt) function - the main function of this type of window is tilt-function, which is our standard offer.
  • Windows with C (casement) function - the main function of this type of window is casement-function.
  • Windows with C (casement) function - the main function of this type of window is casement-function.
 


mb45photos